HolyBro HolyBro Kakute H7 V1.5 Flight Controller ICM-42688-P for RC FPV Drone RC Tools New - Flight Controllers at ZoneFPV
HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New-2
HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New-3
HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New-4
HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New-5
HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New-6

HolyBro Kakute H7 V1.5 Flight vezérlő ICM-42688-P for RC FPV drón RC Tools New

$86.14 $123.06 Save $36.92

Az árak tartalmazzák az ÁFA-t és az esetlegesen alkalmazandó vámokat

Minden ár tartalmazza az import adót és az áfát

In stock!

Általában 3 munkanapon belül szállítjuk

Add $29.00 more for FREE shipping!
 
 

 

The version that is being shipped at the moment is Kakute H7 V1.5. From V1.3, Kakute H7 has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port. For details on the difference between versions, please see this chart.

Due to the end of production of MPU6000 IMU, ICM-42688-P will be used for the new version of Kakute H7, which is supported by Betaflight version 4.5.2 and later. 

Description:

The Holybro Kakute H7 Flight vezérlő is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD kamera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V/3A BEC, easy soldering layout and much more.

The Kakute H7 builds upon the best features of its F7 predecessor and further improves on hardware components and layout. With the onboard Bluetooth chip (optional), you can perform Betaflight configuration and tune wirelessly on your phone with the SpeedyBee Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V regulator designed to power your HD video adó like DJI/Caddx FPV Air Unit & Caddx Vista while supporting analog VTX systems.

It has 6x dedicated UART ports with built-in inversion for peripherals (UART2 is used for Bluetooth telemetry), along with a full MicroSD Card slot for virtually unlimited Blackbox data logging. Dual plug-and-play 4in1 ESC connectors, allowing easy plug-and-play support for x8 Octocopter configuration and keeping it simple and clean. The integrated BetaFlight OSD makes it easy to kijelző important information on your FPV kijelző like akkumulátor voltage, flight time, warnings, RSSI, okos Audio features and more. It is also ready for autonomous flight with the on-panel barometer. There are LED & hangjelző pad, I2C pad (SDA & SCL) for external GPS/Magnetometers

 

 

Kakute H7 Specification :

  • MCU - STM32H743 32-bit processor running at 480 MHz 

    • Professional underfill epoxy for mechanical reinforcement

  • IMU - MPU6000 (V1.3), ICM-42688-P (V1.5)

  • Barometer - SPA06 (BMP280 for previouse version)

  • OSD - AT7456E

  • Onboard Bluetooth chip - ESP32-C3   (Optional)

    • SpeedyBee IOS & Android App Compatible 

    • Note: The Bluetooth onboard is set to automatically turn off when the flight vezérlő is unlocked (armed) and turn on automatically when the flight vezérlő is locked (disarmed) in Betaflight

  • 6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)

  • 9x PWM Outputs (8 Motor Output, 1 LED)

  • 2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)

  • 1x JST-SH1.0 6pin VTX port (For HD Systems like Caddx Vista & Air Unit)

  • akkumulátor input voltage: 3S - 8S

  • BEC 5V 2A Cont.

  • BEC 9V 3A Cont 

  • USB Type-C

  • Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets

  • Dimension - 35x35mm

  • Weight - 8g

Firmware Targets

Package Includes:

  • 1x Kakute H7 V1.5 Flight vezérlő

  • 4x M3 Silicon Grommets

  • 2x JST-SH1.0_8pin 150mm kábel (For ESCs)

  • 2x JST-SH1.0_6pin 80mm & 150mm kábel (For DJI Air Unit) 

  • 1x JST-SH1.0_6pin Colored Silicon 150mm kábel (For Caddx HD System and other VTX)