The version that is being shipped at the moment is Kakute H7 V1.5. From V1.3, Kakute H7 has USB-C, 9V 3A BEC for VTX, and JST-SH connector for VTX port. For details on the difference between versions, please see this chart.
Due to the end of production of MPU6000 IMU, ICM-42688-P will be used for the new version of Kakute H7, which is supported by Betaflight version 4.5.2 and later.
Description:
The Holybro Kakute H7 Flight controlador is full of features including integrated Bluetooth, dual plug-and-play 4in1 ESC ports, HD cámara plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD card slot, 5V and 9V/3A BEC, easy soldering layout and much more.
The Kakute H7 builds upon the best features of its F7 predecessor and further improves on hardware components and layout. With the onboard Bluetooth chip (optional), you can perform Betaflight configuration and tune wirelessly on your phone with the SpeedyBee Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy plug-and-play port with an onboard 9V regulator designed to power your HD video transmisor like DJI/Caddx FPV Air Unit & Caddx Vista while supporting analog VTX systems.
It has 6x dedicated UART ports with built-in inversion for peripherals (UART2 is used for Bluetooth telemetry), along with a full MicroSD Card slot for virtually unlimited Blackbox data logging. Dual plug-and-play 4in1 ESC connectors, allowing easy plug-and-play support for x8 Octocopter configuration and keeping it simple and clean. The integrated BetaFlight OSD makes it easy to pantalla important information on your FPV pantalla like batería voltage, flight time, warnings, RSSI, inteligente Audio features and more. It is also ready for autonomous flight with the on-placa barometer. There are LED & zumbador pad, I2C pad (SDA & SCL) for external GPS/Magnetometers
Kakute H7 Specification :
-
MCU - STM32H743 32-bit processor running at 480 MHz
-
Professional underfill epoxy for mechanical reinforcement
-
-
IMU - MPU6000 (V1.3), ICM-42688-P (V1.5)
-
Barometer - SPA06 (BMP280 for previouse version)
-
OSD - AT7456E
-
Onboard Bluetooth chip - ESP32-C3 (Optional)
-
SpeedyBee IOS & Android App Compatible
-
Note: The Bluetooth onboard is set to automatically turn off when the flight controlador is unlocked (armed) and turn on automatically when the flight controlador is locked (disarmed) in Betaflight
-
-
6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
-
9x PWM Outputs (8 Motor Output, 1 LED)
-
2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
-
1x JST-SH1.0 6pin VTX port (For HD Systems like Caddx Vista & Air Unit)
-
batería input voltage: 3S - 8S
-
BEC 5V 2A Cont.
-
BEC 9V 3A Cont
-
USB Type-C
-
Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
-
Dimension - 35x35mm
-
Weight - 8g
Firmware Targets
-
BetaFlight: KakuteH7 (v4.5.2 & newer)
-
INAV: KakuteH7 (4.0.0 & newer)SD card support added in 4.1.0.
-
Package Includes:
-
1x Kakute H7 V1.5 Flight controlador
-
4x M3 Silicon Grommets
-
2x JST-SH1.0_8pin 150mm Cable (For ESCs)
-
2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)
-
1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)
